top of page
instalacao01.jpg
INSTALATION PROCESS

Earthwork

To carry out the earthwork and to better use and save the resources and materials needed in the project, it is recommended that the topography service be performed to indicate the leveling of the land and its areas of cut, fill and compensation.

Against floor
On the clean, leveled and properly compacted ground, the counter-floor can be made of concrete or gravel layer with asphalt emulsion:
→  On concrete base:

The reinforced concrete floor, fck 25MPa, with a thickness of 5-7cm, and should observe the drop of 0.5 - 1.0% and should not have unevenness, basins and depressions to avoid water accumulation. Observe the need for the expansion joint and hardware to avoid cracks and protect the base. To finish it is enough to be performed.

→  On gravel / pebble base:

It is necessary to have a drop of 0.5 - 1.0%, so that the rainwater can flow with ease, without puddles of water forming in the field.
The underfloor consists of layers of gravel / pebble 1 and stone powder, compacted with a roller followed by a priming process.

Installation of synthetic lawn
PRIMEGRASS has a highly qualified and specialized team in the installation and maintenance of decorative and sports synthetic lawns to bring PRIMEGRASS customers the best shopping experience for their synthetic lawns.

Alambrados Structure
The fences can be built with structures from 2.0 to 6.0 m high, according to the specification of each client. The structures are composed of 2 ”tubes, with guides and lighting towers in tubes of 2, / ²”. The fences can be closed with PVC coated canvas in different configurations.
Illumination
The lighting system can be made with sets of 400W metallic vapor lamps or LED lamps with equivalent power, distributed according to the size of the field.
bottom of page